6990 Peachtree Industrial Blvd · Peachtree Corners, GA 30071
Highly certified & insured Admin@home-hammer.com (470) 945-4535
Home & Hammer The Roofing Company Free inspection

Metal roofing

The roof you install once.

Standing seam metal outlives two or three shingle roofs, sheds pine debris that clogs everything else, and works on pitches where shingles simply can't go.

Two families, very different products

Standing seam

Vertical panels joined by raised seams, with the fasteners concealed underneath. Nothing penetrates the weather surface, which is why it lasts 40 to 70 years. Panels expand and contract on clips rather than fighting fixed screws. It's the premium residential metal system and what we recommend for homes.

Exposed fastener (R-panel, 5V, corrugated)

Screwed through the face with neoprene washers. Considerably cheaper, entirely legitimate for barns, workshops, agricultural and some commercial buildings. The washers are the wear item — expect to re-fasten at intervals, and treat a 40-year claim on this system with scepticism.

Metal shingles and tiles

Stamped panels imitating shake, tile or slate. Useful where an HOA won't approve the look of standing seam but you want metal's longevity.

Why metal suits this region specifically

Metro Atlanta has three conditions that make metal a stronger argument here than in a lot of markets.

  • Pine and oak canopy. Metal sheds needles and debris that pack in shingle valleys and hold moisture
  • Low-pitch additions and porches. Metal handles pitches down to 1:12 or lower where shingles cannot go
  • Long humid summers. No organic material to grow algae, no granules to lose
  • Insurance. Many carriers discount for impact-resistant metal systems, worth asking about
  • Solar. Standing seam takes clamp-on solar mounts with no roof penetrations at all

Is it loud in the rain?

Over a solid deck with underlayment and an insulated attic beneath, no — it's comparable to a shingle roof. The noise reputation comes from metal over open purlins on barns, which is a genuinely different assembly.

Standing seam versus exposed fastener

Standing seam Exposed fastener
FastenersConcealed under the seamThrough the panel face
Service life40–70 years20–30 years
MaintenanceMinimalPeriodic re-fastening as washers age
Thermal movementPanels float on clipsFixed; can elongate screw holes
CostHigherConsiderably lower
Best forHomes, visible roofs, long holdsBarns, workshops, utility buildings

Common questions

Will a metal roof attract lightning?
No. Metal doesn't attract strikes, and being conductive and non-combustible it disperses energy more safely than most roofing materials.
Can you install metal over my existing shingles?
It's physically possible and we generally decline. You lose the deck inspection, trap moisture between layers, and add complications to the warranty.
Does it dent from hail?
Heavy-gauge steel and aluminium resist typical Georgia hail well. Very large hail can cosmetically dent softer metals like copper. Ask for the impact rating on the specific product.
What about expansion noise?
Standing seam panels are designed to move on clips. Poorly installed panels that are pinned at both ends can tick and pop as temperatures swing — another reason installation detail matters more than product.
How much more than shingles?
Typically two to three times an architectural shingle roof, front-loaded against a service life that's roughly double. Whether that's a good trade depends almost entirely on how long you'll own the house.

Request your free inspection

Tell us about the property and we'll come out with a camera, a moisture meter and a written number.

Goes straight to Admin@home-hammer.com. Prefer to talk? Call (470) 945-4535.

Thinking metal?

We'll price it against a shingle system on the same roof so you can compare the real numbers rather than the general argument.

Call us Free inspection