6990 Peachtree Industrial Blvd · Peachtree Corners, GA 30071
Highly certified & insured Admin@home-hammer.com (470) 945-4535
Home & Hammer The Roofing Company Free inspection

Flat & low-slope

Flat roofs aren't flat. They fail when they stop draining.

TPO, EPDM and modified bitumen for porch roofs, additions, dormers and commercial buildings — plus the drainage corrections that make any of them last.

Ponding is the whole story

A low-slope roof is designed to drain within about 48 hours of rain. Water that sits longer than that is ponding, and ponding is what kills flat roofs: it degrades the membrane, adds enormous weight, finds every seam, and grows biological material that holds still more moisture.

So the first thing we look at isn't the membrane. It's where the water goes. Blocked scuppers, undersized drains, deflected decking, and additions built with insufficient fall are the root causes behind most of the low-slope failures we're called to.

The three membranes

  • TPO — heat-welded thermoplastic, usually white and reflective, seams fused rather than glued. The most common commercial choice now and excellent in Georgia heat. 20 to 30 years.
  • EPDM — synthetic rubber, typically black, glued or ballasted seams. Proven over decades, very forgiving of movement, absorbs heat. 20 to 30 years.
  • Modified bitumen — asphalt-based, torch or self-adhered in layers. Tough underfoot, good for roofs with regular traffic. 15 to 25 years.

For a residential porch or an addition, we'll often recommend standing seam metal instead — if the pitch allows it, it looks better from the windows above and lasts longer.

Signs a low-slope roof needs attention

  • Standing water still present more than two days after rain
  • Seams lifting, wrinkling or separating
  • Blisters or bubbles in the membrane surface
  • Punctures from foot traffic, dropped tools or HVAC work
  • Cracked or dried-out sealant at penetrations and edge metal
  • Interior staining under the roof area
  • Vegetation or algae growing in a ponding area

Rooftop units are a common cause

HVAC technicians walk low-slope roofs regularly and rarely repair what they step through. If you have rooftop units, add a walk pad and inspect around the curbs annually.

What we do on low-slope roofs

Full membrane replacement

Tear-off, insulation, and new TPO, EPDM or modified bitumen with proper edge metal and terminations.

Drainage correction

Tapered insulation, additional drains, scupper repair and cricket construction to eliminate ponding.

Leak repair

Seam repair, patching and penetration reflashing to buy time before a planned replacement.

Roof coatings

Silicone and acrylic restoration systems that extend life on a sound but ageing membrane.

Curb & penetration work

Reflashing rooftop units, vents, pipes and conduit — where most low-slope leaks start.

Porch and addition roofs

The small residential low-slope areas that roofers often decline and homeowners struggle to get fixed.

Common questions

How long does a flat roof last?
20 to 30 years for TPO and EPDM, 15 to 25 for modified bitumen, assuming it drains properly. A roof that ponds can fail in half that regardless of what it's made of.
Can you coat instead of replacing?
If the membrane is sound and the insulation underneath is dry, a silicone restoration coating can add 10 to 15 years for considerably less than replacement. If there's wet insulation, coating traps it and wastes your money — we core test before recommending it.
Why does my porch roof keep leaking?
Usually because it was built with too little fall, or because the junction where it meets the house wall was flashed as though it were a steep-slope roof.
TPO or EPDM?
In Georgia heat, TPO's reflectivity is a real advantage and its welded seams are stronger. EPDM handles movement and cold better and has the longer track record. For most buildings here we lean TPO.

Request your free inspection

Tell us about the property and we'll come out with a camera, a moisture meter and a written number.

Goes straight to Admin@home-hammer.com. Prefer to talk? Call (470) 945-4535.

Flat roof holding water?

We'll survey the drainage before quoting a membrane — replacing the surface without fixing the fall just buys you the same problem again.

Call us Free inspection