6990 Peachtree Industrial Blvd · Peachtree Corners, GA 30071
Highly certified & insured Admin@home-hammer.com (470) 945-4535
Home & Hammer The Roofing Company Free inspection

Gutter guards

Most gutter guards were not designed for pine straw.

Under a Georgia canopy, the guard that stops leaves will happily let needles through. Here's what actually works and what we'd skip.

The problem is specific to this canopy

Gutter guard marketing is written for oak and maple country. The debris there is broad leaves, which almost any screen will stop.

Metro Atlanta throws pine needles, oak tassels, seed pods and shingle granules at your gutters. Needles are thin, stiff and pointed — they thread through anything with a gap wider than about 50 microns and then mat into a felt that holds water against the fascia. That's worse than an open gutter, because you can't see it and nobody cleans it.

So the test isn't leaves, it's needles

We install and honestly compare a few types rather than pushing one branded system, because the right choice genuinely depends on your tree cover, roof pitch and budget.

How the types compare

Short version: stainless micro-mesh is what we recommend for most heavily canopied properties, and foam inserts are what we'd ask you not to buy.

  • Stainless micro-mesh — stops needles and granules; the best performer under pine, and the one we install most
  • Reverse-curve / surface tension — effective on leaves, handles high volume, but visible from the ground and can shed needles into the gutter in heavy rain
  • Perforated aluminum screen — inexpensive, fine under light canopy, defeated by needles
  • Foam inserts — needles embed in the foam and it becomes a planter. We won't install them
  • Brush inserts — same problem as foam, plus they trap granules

No guard is maintenance-free

Any company promising you'll never clean a gutter again is overselling. A good micro-mesh system turns a twice-yearly clean-out into a periodic brush-off of the top surface. That's a real improvement, and it's the honest claim.

What we install

Stainless micro-mesh

Marine-grade mesh on an aluminum frame, fastened to the gutter rather than under your shingles. Our default recommendation.

Reverse-curve systems

Where the roof pitch and volume suit it and appearance isn't a concern.

Guard with new gutters

Fitted as one assembly during a gutter replacement, which is cheaper and performs better than retrofitting later.

Retrofit to existing

Provided the gutters are sound, correctly pitched and properly hung. We check first — guards on failing gutters are wasted money.

Common questions

Will guards void my roof warranty?
They can, if they're fastened by lifting the first course of shingles. We fasten to the gutter or the fascia, not through your roofing. Ask any guard company exactly how they attach before you sign.
Are gutter guards worth the money?
Under heavy pine, generally yes — they pay for themselves against repeated cleaning and the fascia damage that overflow causes. On an open lot with little canopy, honestly, probably not.
Do I still need my gutters cleaned?
Less often, and it becomes a surface brush-off rather than digging out packed sludge. We'd still look at them annually as part of a maintenance visit.
Can you install guards on my existing gutters?
If they're sound and correctly pitched. If they're sagging or under-sized, guards will just preserve the existing problem.

Request your free inspection

Tell us about the property and we'll come out with a camera, a moisture meter and a written number.

Goes straight to Admin@home-hammer.com. Prefer to talk? Call (470) 945-4535.

Under heavy pine?

We'll look at your canopy, your gutter size and your roof pitch before recommending anything — including recommending nothing.

Call us Free inspection